ENVIO GRATUITO EM ENCOMENDAS SUPERIORES A 150€
Saltar para o conteúdo
RAM Mounts Cradles RAM-HOL-ZE25PHLU

RAM Mounts Cradles RAM-HOL-ZE25PHLU

Suporte Form-Fit da RAM Mounts (com fecho de chave) para Zebra ET60/65

SKU RAM-HOL-ZE25PHLU
Series: RAM Mounts Cradles
Esgotado
€249,93
com IVA €302,42
Unidades a caminho, disponíveis para compra
Suporte no local por 1 ano

Notifique-me quando voltar ao estoque

Request a quote for volumn pricing

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 12VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHLU holder is supplied.
Falar com um especialista
Get support from our barcode printers experts! Fast, reliable assistance for setup, supplies, and any questions you may have Get Help Now

Métodos de pagamento

  • Visa
  • Mastercard
  • PayPal
  • Amex
  • Bizum

Métodos de envio

  • UPS
  • InPost
  • FedEx
  • DHL
  • Schenker
  • Kuehne Nagel
  • Raben
  • MRW
  • Tipsa

Descrição
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 12VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHLU holder is supplied.

Especificações detalhadas

Ficha técnica RAM MOUNTS CRADLES RAM-HOL-ZE25PHLU

  • Fabricante RAM Mount
  • Série RAM Mounts Cradles
  • Modelos compatíveis Zebra ET60/ET65
  • Mensagem de presente disponível No
  • Garantia 36 months

Envio
Shipping

Envio totalmente seguro

As transportadoras com as quais trabalhamos são: DHL, UPS, Correo Express y TXT.

Pedidos acima de € 150 são gratuitos dentro dos países da União Europeia e serão entregues em 2 a 3 dias úteis (exceto Ilhas Canárias, Ceuta e Melilla).

Tipos de Envio

  • Envio em 24 horas
  • Envio Padrão
  • Frete Grátis
  • Retirada Grátis na Loja
Saiba mais sobre envio

Manutenção

A nossa empresa oferece diferentes tipos de manutenção. Pode solicitar um contrato de manutenção com a Barcode Site que se adapte às suas necessidades, seja em função do equipamento ou do período que considere necessário.

Para mais informações, envie um e-mail para info@barcodesite.com

Falar com um especialista

Métodos de pagamento

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner

Métodos de envio

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner