ENVIO GRATUITO EM ENCOMENDAS SUPERIORES A 150€
Saltar para o conteúdo
RAM Mounts Cradles RAM-HOL-ZE22PDLU

RAM Mounts Cradles RAM-HOL-ZE22PDLU

Suporte Form-Fit RAM Mounts (com fechadura) para Zebra ET80/85

SKU RAM-HOL-ZE22PDLU
Series: RAM Mounts Cradles
Esgotado
€231,48
com IVA €280,09
Unidades a caminho, disponíveis para compra
Suporte no local por 1 ano

Notifique-me quando voltar ao estoque

Request a quote for volumn pricing

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PDLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22PDLU holder is supplied.
Falar com um especialista
Get support from our barcode printers experts! Fast, reliable assistance for setup, supplies, and any questions you may have Get Help Now

Métodos de pagamento

  • Visa
  • Mastercard
  • PayPal
  • Amex
  • Bizum

Métodos de envio

  • UPS
  • InPost
  • FedEx
  • DHL
  • Schenker
  • Kuehne Nagel
  • Raben
  • MRW
  • Tipsa

Descrição
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PDLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22PDLU holder is supplied.

Especificações detalhadas

Ficha técnica RAM MOUNTS CRADLES RAM-HOL-ZE22PDLU

  • Fabricante RAM Mount
  • Série RAM Mounts Cradles
  • Modelos compatíveis Zebra ET80/ET85
  • Mensagem de presente disponível No
  • Garantia 36 months

Envio
Shipping

Envio totalmente seguro

As transportadoras com as quais trabalhamos são: DHL, UPS, Correo Express y TXT.

Pedidos acima de € 150 são gratuitos dentro dos países da União Europeia e serão entregues em 2 a 3 dias úteis (exceto Ilhas Canárias, Ceuta e Melilla).

Tipos de Envio

  • Envio em 24 horas
  • Envio Padrão
  • Frete Grátis
  • Retirada Grátis na Loja
Saiba mais sobre envio

Manutenção

A nossa empresa oferece diferentes tipos de manutenção. Pode solicitar um contrato de manutenção com a Barcode Site que se adapte às suas necessidades, seja em função do equipamento ou do período que considere necessário.

Para mais informações, envie um e-mail para info@barcodesite.com

Falar com um especialista

Métodos de pagamento

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner

Métodos de envio

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner