ENVIO GRATUITO EM ENCOMENDAS SUPERIORES A 150€
Saltar para o conteúdo

RAM Mounts Cradles RAM-HOL-HON11PD2-DB9U

Suporte RAM Mounts Form-Fit (com trinco) para tablet Honeywell ScanPal EDA10A com capa protetora OEM - DC de 5,5 mm e conector duplo USB-A/DB-Sub

SKU RAM-HOL-HON11PD2-DB9U
Series: RAM Mounts Cradles
Esgotado
€245,98
com IVA €297,64
Unidades a caminho, disponíveis para compra
Suporte no local por 1 ano

Notifique-me quando voltar ao estoque

Request a quote for volumn pricing

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A.An RAM NFC add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON11PD2-DB9U:Compatible with OEM hand strap Easy insertion and removalCharging functionWith LatchPrepared for RAM NFC Extender & RAM Vent-Temp2-Hole side mount (Diamond ball base) for additional devices or peripheral accessoriesInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: 2x USB-A 2.0 & DB9 (Peripheral output - 900mAh per Port)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, WEEE, CE & FCCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON11PD2-DB9U holder is supplied.
Falar com um especialista
Get support from our barcode printers experts! Fast, reliable assistance for setup, supplies, and any questions you may have Get Help Now

Métodos de pagamento

  • Visa
  • Mastercard
  • PayPal
  • Amex
  • Bizum

Métodos de envio

  • UPS
  • InPost
  • FedEx
  • DHL
  • Schenker
  • Kuehne Nagel
  • Raben
  • MRW
  • Tipsa

Descrição
This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A.An RAM NFC add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON11PD2-DB9U:Compatible with OEM hand strap Easy insertion and removalCharging functionWith LatchPrepared for RAM NFC Extender & RAM Vent-Temp2-Hole side mount (Diamond ball base) for additional devices or peripheral accessoriesInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: 2x USB-A 2.0 & DB9 (Peripheral output - 900mAh per Port)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, WEEE, CE & FCCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON11PD2-DB9U holder is supplied.

Especificações detalhadas

Ficha técnica RAM MOUNTS CRADLES RAM-HOL-HON11PD2-DB9U

  • Fabricante RAM Mount
  • Série de impressora RAM Mounts Cradles
  • Mensagem de presente disponível No
  • Garantia 0 months

Envio
Shipping

Envio totalmente seguro

As transportadoras com as quais trabalhamos são: DHL, UPS, Correo Express y TXT.

Pedidos acima de € 150 são gratuitos dentro dos países da União Europeia e serão entregues em 2 a 3 dias úteis (exceto Ilhas Canárias, Ceuta e Melilla).

Tipos de Envio

  • Envio em 24 horas
  • Envio Padrão
  • Frete Grátis
  • Retirada Grátis na Loja
Saiba mais sobre envio

Manutenção

A nossa empresa oferece diferentes tipos de manutenção. Pode solicitar um contrato de manutenção com a Barcode Site que se adapte às suas necessidades, seja em função do equipamento ou do período que considere necessário.

Para mais informações, envie um e-mail para info@barcodesite.com

Accessories

Compatible accessories for RAM Mounts Cradles

Series models

Other series products RAM Mounts Cradles
Falar com um especialista

Métodos de pagamento

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner

Métodos de envio

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner